The high temperature binder is a fiber bonding material for the construction of aluminum silicate ceramic fiber. It has the characteristics of high temperature resistance, strong bonding, especially not falling off under high temperature environments, and has a significant energy saving effect. Excellent resistance to wind erosion. It can improve the heat resistance and erosion resistance of the fiber. After being applied to the surface of the fiber and sintered at a high temperature, the coating can withstand the air flow of 80-90m/s.
　　Product features: high temperature load softening temperature, high bonding strength at room temperature, short hardening time, low porosity, low drying and baking shrinkage, high temperature resistance; temperature resistance matching with the fiber, high bonding strength; no damage to the fiber after sintering, Small shrinkage during drying and baking; good chemical resistance and wind erosion resistance; stable chemical properties under high temperature conditions; convenient construction.
　　Product temperature grade: 1050, 1260, 1400, 1600The high-temperature adhesive is an inorganic adhesive prepared from refractory, carrier liquid, dispersant, and inorganic bonding agent. This adhesive forms a good chemical bonding force on the surface of the bonded object, not only bonding Strong, and has excellent heat resistance. The viscosity of the binder can be adjusted at any time according to the construction method to meet the construction requirements of the furnace lining. The adhesive can reach the strength required for construction at room temperature.